• Kask, Aidan, "Ski Flexure Optimization," 2023
• Paschke, Justin, "Development of a Hybrid Golf Club Head, Using Sustainable Resources and Cost-Efficient Materials," 2023
• Pelletier, Kenyon, "Development of a Hybrid Golf Club Shaft, Using Sustainable Resources and Cost-Efficient Materials," 2023
• Tucker, Shannon, "The Design and Construction of a Sustainable Beam," 2023
• Subik, Sarah, "Mechanical Characterization of Downhill Ski Performance," 2021
• Constable, Hunter, "Evaluation of intervertebral Disc Degeneration and Recovery," 2019
• Harkness, Brian, "Composite Beam Design and Construction for 2019 SAMPE Bridge Contest," 2019
• Kellner, Arden, "Mechanics of Barefoot Running," 2019
• Ye, Terry, "Investigating Material Characterization on Achilles Tendons with and Without Treatment," 2019
• Ashcroft, Adam, "Manufacturing and Testing Enviornmentally Friendly Hiking Boot Shanks," 2018
• Glennon, Sean Q., "Designing of a Load Frame for Nonlinear Viscoelastic Biological Materials," 2018
• Sears, Nathan, "Designing and Manufacturing of a Cross Country Ski with Sustainable Materials," 2018
• Tocci, Ron, "Design Theory, and Construction of a Full-Scale Sustainalbe Composite Hockey Stick Shaft," 2018
• Armanetti, Evan J., "Weight Optimization of a Natural Composite I-Beam for the 2017 SAMPE Bridge Competition," 2017
• Keever, Robert, "Design of a Tensile Testing Method for the Purpose of Characterizing the Mechanical Properties of Skeletal Mycelium," 2017
• Noonan, Joseph T., "The analyzation and creation of composite body panels for the SAE Baja Car," 2017
• Wood, Alexandra, "2017 SAMPE Carbon Fiber Composite I-Beam Design & Optimization," 2017
• Chee, Marian, "Development of a Methodology to Optimize the Accuracy of DIC," 2016
• Dhlamini, Zibusiso, "Design and Fabrication of an In-Situ Micro-Tensile Stage for Optical Microscopy Applications," 2016
• Prescott, W. Aaron, "Characterization of Material Properties of Skeletal Mycelium for use as a Biocomposite Constituent," 2016
• Smith, Duncan, "Characterization of Natural Fibers for Sustainable Composite Materials," 2016
• Granger, Ryan C., "Use of Mycelium Core to Form a Sustainable Composite Beam for the 2015 SAMPE Bridge Competition," 2015
• Lapointe, Caelan, "CFD Modeling of the Flow of Resin into a Preform Mold of Natural Fibers," 2015
• Milojevic, Hristina, "Evaluation of the Bond between Natural Fibers and Resins Formulated from Natural Oils," 2015
• Allan, M., "Constructing a Sustainable Composite Beam for the 2014 SAMPE Bridge Competition," 2014
• Johnston, Ashley R., "Designing an Adjustable Below Knee Prosthetic for Children," 2014
• Mansfield, M., "Effects of Playing Surface and Shoe Type on ACL Tears in Soccer Players," 2014
• Owen, C., "Engineering a Water Filtration Device using Hydrophobic Zeolite Absorbent as the Nano-Filter," 2013
• Wagner, R., "Design of a Green Composite Beam for the 2013 SAMPE Beam Competition," 2013
• Ehrlich, J., "SAE Aero Design Project: Structural Design of Wing and Tail Sections," 2013
• Dlamini, M., "Characterization of deformation fields in hypertense amphibian hearts in vivo using the Speckle Image Photogrammetry Technique," 2012
• Chin, W., "Finite Element Analysis and Design of the SAE Aero Competition Plane Structure," 2012
• Bucklin, K., "High Gas Mileage Vehicle Design," 2012
• Davis, J., "ASME Human Powered Vehicle Competition (HPVC) Body Design," 2012
• Abrahamson, K., "Investigation of the Mechanical Strength of Flexible Solar Nano-Composites," 2011
• Berg, K., "Construction and Design of a Bridge Using Composite Materials," 2011
• Bombardier, M., "Mechanical Characterization of Flexible Solar Nano-Composites," 2011
• Jung, K., "Design of a Stand-Alone Pneumatically Powered Lift Chair for the Activity Restricted Elderly," 2011
• Brown, A., "Design of an Arm Pitching Machine with Curveball Capability," 2010
• Little, B., "The Design of a Tire-Sandal Cutting Machine for Sub-Saharan African Villages," 2011
• Herman, T., "The Mechanical Strength of Flexible Solar Nanocomposites," 2010
• Maher, J., "Investigation of Bullfrog Hearts during Simulated Heart Attacks," 2010
• Adams, M.T., "The Photogrammetry of Bullfrog Hearts," 2009
• Hopengarten, S.P., "Design and Fabrication of a Full Suspension Mountain Bike Suspension System,"2009
• Moriaty, M.A., "Design of a Handheld Pharmaceutical Design," 2009
• Adam, B., "Pico OWC1 Wave Energy Power Plant," 2008
• Mrazek, J., "Design of an Ice Hockey Goal Sensor," 2008
• Salemo, A. "Design of an Adaptive Hockey Puck for the Visually Impaired," 2008
• Wood, C.D., "Morphology of Advanced Nanocomposites in Novel Solar Cell Design," 2008
• Blythe, B.W., "Design of an Magneto-Rheological Auxiliary Brake System for Heavy Capacity Automotive Vehicles," 2007
• Kanagaki, G., "Investigating Magneto-Rheological Fluids," 2007
• Single, G.W., "Inventing and Developing a Medical Device to Aid in an Emergency Cricothyroidotomy Procedure," 2007
• Burr, M.S., "Design of an Exercise Mechanism for Nonivasive Magetocardiography," 2006
• Goodman, A., "PHotogrammetry of Bullfrog Hearts," 2006
• Spicer, C., "Design of an Adhesion Tester for High Temperature Superconductors," 2006
• VanWoeart, M., "Investigation of Snowboard Dynamics," 2006
• Beal, J., "Design of an Adjustable Sled to be used in Sled Hockey," 2005
• Robertson, D., "The Design and Construction of a Composite RC Boat Hull," 2005
• Worth, M., "Shoulder Rehabilitation and Stabilization: The Creation of a Rehabilitation Brace for the Aid in Shoulder Dislocations," 2005
• Sanders, G., "Design of a six-degree-of-freedom Stewart Platform Load Frame for Studying the Kinetics of the Spine," 2004
• Grieco, A., "Photogrammetry of Bullfrog Hearts," 2004
• Hilbert, M., "Design of a Dual Suspension Cross Country Mountain Bike Frame," 2004
• Maleszweski, J., "Designing a Fly Rod," 2003
• Robinson, S., "Measuring Myocardial Deformation in Bullfrog Hearts," 2003
• Pasch, A., "Restoration of a 1931 Ford Model A Engine and Transmission design of an Alternative Camshaft," 2002
• Kimball, K., "Design and Fabrication of a Composite Body for a Formula 1 SAE Car," 2002
• Howe, W., "The Design of a Drive Train for the 2002 Formula Car," 2002
• Herzlinger, J., "International Virtual Design Studio: design of an Autonomous Vehicle," 2002
• Pasch, A., "International Virtual Design Studio: design of an Autonomous Vehicle," 2002
• Bowers, J., "International Virtual Design Studio Project: Design and construction of a Machine that Autonomously Scaled a Wall, Avoided Holes, and Found a Door to Reach the Finish Line," 2002
• Briody, S., "International Virtual Design Studio Project: Design and construction of a Machine that Autonomously Scaled a Wall, Avoided Holes, and Found a Door to Reach the Finish Line," 2002
• Grant, M., "Design of Air INtake Manifold and Fuel Injection System," 2002
• Denema, P., "The Design and Construction of a Mechanical Fountain," 2001
• Gretten, M., "Autonomous walking Quadruped Robot," 2001
• Fontaine, R., "Design of Autonomous Quadruped Walking Robot - IVDS France," 2000
• Perrucci, S., "Enhancing the Thermal Properties of Carbon Fiber Plastics," 2000
• Roy, B., "International Virtual design Competition (Turkey): An Autonomous Robot Design," 2000
• Spindler-Ranta, S., "International Virtual Design Studio 2000 (Turkey): Team 2," 2000
• Williams, G., "Mechanical Engineering Design (IVDS Turkey): Team 3," 2000
• Gretten, M., "Design and Modification of an Autonomous Walking Quadruped Robot: IVDS France," 2000
• Poindexter, D., "International Virtual Design Studio Project 1998-1999," 1999.
• Haynes, P., "IVDS '98: The Fire Extinguishing Robot," 1999.
• Pincus, A., "Design and Production of a Machine that Autonomously Sought Out and Extinguished Flames," 1999
• Flynn, P., "I.V.D.S. Team 1, Flame Extinguishing Robot," 1999
• Kimball, C., "International Virtual Design Studio: Design and Manufacture of a Mechatronic Ladder Crossing Machine," 1998.
• Kriz, S.A., "International Virtual Design Project: The Design of a Quadruped Walking Robot," 1998.
• Sandman, J., "Stereolithographic Modeling of a Locomotive Turbocharger," 1998.
• Saunders, K.M.., "International Virtual Design Project: The Design of a Quadruped Walking Robot," 1998.
• Hahl, J., "Union's First Virtual Design Project: To Design a Vehicle Without Wheels, or Wheel-Like Motion," 1997.
• McMurtry, C., "International Virtual Design Studio: Design of a Vehicle Without Wheels, Project I, The 'Pusher'," 1997.
• Smallwood, B., "Union's First Virtual Design Project: To Design a Vehicle Without Wheels, or Wheel-Like Motion," 1997.
• Schnepel, M., "Design Methodology for a Down Hill Mountain Bike," 1997.
• Sobczak, K., "International Virtual Design Studio: Design of a Vehicle Without Wheels, Project I, The 'Pusher'," 1997.
• Frye, J., "Design of the Formula SAE Frame," 1996.
• Robertson, D., "Design of Instrumentation for Measuring the Force Exerted by a Crew Team," 1996
• Sadd, D.L., "Design and Building of a Quasi-Static Impact Pendulum," 1996
• Crayon, D., "Design and Fabrication of Suspension System for the 1995 Mini Baja Competition Vehicle," 1995.
• Julicher, B., "Design and Construction of the Formula SAE Frame," 1995
• Miller, J.R., "The Design of an Airgun Facility to Test Dynamic Impacts on Composite Materials," 1995.
• Pierson, J.A., "Design of a Carbon Fiber Composite Mast," 1995.
• Rice, W., "Microgravity Countermeasures Device," 1995
• Schell, B.W., "Design and Construction of SAE Mini Baja," 1995.
• Troy, J., "Design and Construction for the Suspension for the Formula SAE Car," 1995
• Weaver S.A., "The Design and Construction of a Torsional Load Cell," 1995.